How Limp Wristing Causes Glock Cycling Problems

How Limp Wristing Causes Glock Cycling Problems

A lot of cycling problems related to limp wristing might occur with any blow back pistol. To that end, we will examine 3 different handguns, a Sig Sauer P 556 https://www.thetruthaboutguns.com/gun-review-the-sig-sauer-p556-pistol/, which has an aluminum frame, CZ 75 https://cz-usa.com/product-category/handguns/75-full-size-series/with a steel frame, and a Glock 19 https://eu.glock.com/en/products/pistols/g19with a polymer frame. Some shooters believe that the Glock cannot be limp wristed or that a handgun cannot be limp wristed, they think that it’s a total fallacy that it never happens andthat there is something else that causes the malfunction. Limp wristing is something that really does happen, and it happens to a lot of people. It can even happen to people that are very experienced with handguns. The first time they shoot a Glock they might have cycling malfunctions and that happens with inexperienced shooters or female shooters the first time they fire a Glock. A simple Google or Hey Siri search about limp wrist Glock cycling problems will shed more light on this important issue.

You can induce a malfunction in a Glock 19 with the same ammo simply by the way you hold the handgun. You may say you never shoot a handgun like that but, that’s not the point. They simply happen unless you hold it in a way that allows the gun not only to flip up, but also to move back freely. When the gun cycles, the slide moves to the rear quickly and it needs something to act upon and your hand has to hold it steady so the slide can recoil back and then chamber the next round. A lot of the problem is the fact that the Glock has a polymer frame that doesn’t have much mass so if you don’t hold the handgun firmly, it doesn’t have much to act on it. That causes the slide to short stroke,soit doesn’t make a full cycle and it causes the malfunction.

If you allow the handgun both to flip up and move backward as it recoils, it might not fire the next round or chamber,it’s short stroked. Pop the spent casing out, put a fresh one in and you can do it again and get a stovepipe. That is a limp wrist malfunction. Do the same test with other handguns that aren’t polymer framed. Like the Sig Sauer P 556. This handgun has an aluminum frame and weighs considerably more than a Glock 19, as does the lower receiver, which is the mass that we’re concerned with because limp wrist malfunctions occur if the mass is not enough. Why does this handgun function when the Glock 19 doesn’t? It’s because of the mass of the frame. The handgun is able to work because it it’s able to move quickly to the rear and not overcome the mass of the frame. A steel framed handgun like CZ 75 is considerably heavier than the Glock 19. It’s even heavier than the Sig Sauer 556. This handgun will come back and also flip up but with no limp wrist malfunctions.Why would you carry a G 19 if it malfunctions? Depending on the way that you hold it, it boils down to training. You cannot cause a G 19 to malfunction unless you’re purposely trying to induce that malfunction. It is a concern if you’re looking to buy a self-defense handgun. There might be a situation that arises where you’re injured, or you’re hurt, and you don’t get a good grip on the handgun when you present from the holster. And you might not be able to hold onto that pistol properly for that first shot and you can induce a malfunction so it’s something to be aware of no matter how many times you fire a Glock 17 or 19, but you don’t have the same problems with the 40 caliber or the 45 caliber Glocks. You can cause them to malfunction by limp wristing them, but not nearly as often as you can with a 9 mm https://www.federalpremium.com/handgun/american-eagle/american-eagle-handgun/11-AE9DP100.htmlGlock and a 45 ACP Glockhttps://us.glock.com/en/pistols/g41-gen4. You might be able to get one or two limp wrist malfunctions out of a magazine trying as hard as you can. So it definitely is a phenomenon that happens mostly with 9 mm Glock pistols. With a full-sized Springfield XDM 3.8 https://www.springfield-armory.com/xdm-series/you will have a little harder time causing it, but not with every round, which you can do with the G 19. It’s not nearly as pronounced as the G 19 or the G 17, and it’s more like a G 21 or G 23, which also will mostly fire, but occasionally you can induce a limp wrist malfunction. A defensive handgun should be able to be fired from any number of positions you can think of, one handed, two handed, limp wristed, whatever. You should not be able cause a malfunction with that handgun, including Glocks. What you need to make sure of is that you can shoot your gun from any number of positions with your carry ammo and make sure it functions properly. You should be able to shoot it with just two fingers and it should work just fine. You should be able to shoot it upside down with two fingers and the gun should work no matter what you do to it. What you need to do is make sure that your gun and your carrying ammo work properly for you no matter how you hold that handgun. If you’re having limp wrist malfunctionsdon’t give up, train, and get plenty of ammo. Most people that have those malfunctions in the beginning can overcome them. If the Glock doesn’t work for you get a different handgun. It doesn’t matter if you have one limp wrist malfunction every thousand rounds,that’s one limp wrist malfunction, too many.Get an aluminum frame or steel frame handgun or even change calibers,go up go 40 or 45 and hopefully that will correct your problem.

It is always a good idea to properly store and organize your pistols and magazines and keep them locked up and away from children. There are many ways to store and organize handguns. One of the best that we have seen is made by Hyskore www.hyskore.com. It’s their 30277 Six Gun Modular Pistol Rack https://hyskore.com/products/30277-6-gun-eva-pistol-rack/. This is a great rack because not only does it have a smooth, semi rigid finish that properly supports handguns and keeps them from touching each other, thereby avoiding scratches and damage, it’s also modular. The rack can be disassembled, and then the various segments can be reassembled to accommodate guns of various widths such as single stack magazine guns, double stack magazine guns, and revolvers. This also leads to the ability to take several racks and add them together to make one customized rack that fills the upper shelf in the typical gun safe so you can utilize every inch and have a place for each one of your guns. This is available from Amazon https://www.amazon.com/HYSKORE-Modular-Pistol-Rack-Green/dp/B00V72R4R2/ref=sr_1_fkmr0_1?dchild=1&keywords=hyskore+dergreezer&qid=1573757094&sr=8-1-fkmr0.

As far as magazine storage goes, if you have that many guns you probably have many magazines. Hyskore has also developed 2 really good pistol magazine storage racking systems. They are the 30316 Double Stack Magazine Organizer https://hyskore.com/products/30316-double-stack-modular-magazine-storage/ which holds 12 double stack magazines, and the 30318 Single Stack Magazine Organizer https://hyskore.com/products/30318-modular-single-stack-magazine-storage/ which holds 16 single stack 1911 style magazines. Both of these items are made from the same closed cell foam as the pistol rack, and the foam sections mount to a sturdy rigid vinyl platform that gets mounted to the wall or the inside of a vault with the included screws. These racks provide neat and functional organization for both fully loaded and unloaded pistol magazines.