Red Rock Precision – Gun Cleaning Tips

Red Rock Precision – Gun Cleaning Tips

A lot of guys want to know how to take care of their rifle and how to clean them like how they should clean their Remington 700 https://www.remington.com/rifles/bolt-action/model-700.First start by removing the bolt and use a bore guide. The reason we use this is because it allows you to guide your rod straight through into the barrel, so you don’t damage the throat of that barrelthereforeit is real critical to use a high quality bore guide. Don’t start the rod and brush from the muzzle and clean it that way. You can really damage your gun doing that as you get your accuracy from that crown of that muzzle. If you damage that, you’re gonna lose a lot accuracy. An excellent product to use to secure your Remington 700 or Winchester Model 70 http://www.winchesterguns.com/products/rifles/model-70.htmlis the Hyskore www.hyskore.com #30022 https://hyskore.com/products/30022-cleaning-sighting-rest-2/ Cleaning and Sighting Rest. It will hold the gun securely for the whole cleaning process. This is available from Amazon https://www.amazon.com/HYSKORE-1003627-Hyskore-Cleaning-Sighting/dp/B000MZILAY/ref=sr_1_2?crid=2RTM95RDAVUX7&dchild=1&keywords=hyskore+vise&qid=1573757185&sprefix=hyskore%2Caps%2C150&sr=8-2.

That bore guide just fits in there right where theround will fit, and we’ll first start by running some KG1 carbon removerhttps://shop.kgcoatings.com/kg/product/kg-1-carbon-remover/through the barrel. This will take the powder and that residue out of there so start by running one wet patch of the KG 1 carbon removerthen take your rod with the brush.We’re using is just a simple little brush bronze, we always use bronze brushes. We don’t use any of the stainless brushes or anything like that. We use abronze brush and they’re caliber specific. We’ll saturate that a little bit and we’ll just go back and forth. You must bereally careful with your brush going out the end of the barrel, then another run, with a wet patch of the KG1 carbon remover.Now run a wet patch of the KG 12 copper removerhttps://shop.kgcoatings.com/kg/product/kg-12-big-bore-cleaner-copper-remover/. You don’t have to use these 2 solvents. Just do a Hey Google or Hey Siri search to find other quality gun cleaning products. Your carbon’s always on top of your copper, so we’ll run a wet patch of that through the barrel and then to get the copper out.The stuff works really quick, you need to scrub it back and forth probably 30 to 30 to 40 times. Do that real quick from action to end, mostly copper stays right at the end by the muzzle and you’ll be able to see that. Always shoot a few fouling rounds through your gun before you take it to the range.

One of the most important things you can do is once your guns all clean is wipe your bolt down and put a little bit of bolt grease on the back side of the lug that faces you as you’re holding it. What this does is keep that from gauling where there’s so much pressure.Always put a little bolt grease on there and work that back and forth and you’re ready to go. A lot of guys think that cleaning a gun is a real, real big deal, but it’s really not. Once you have the right products, the right things and the equipment. It’s really simple.